澳洲工程学论文代写：建筑工程测量方法
对建筑工程测量的标准方法的首要目的，测量的简明方法（CMM）和工程测量的方法和相关的建筑工程as1182-1982（民事法）是基本上任何情况和环境下提供对建筑工程测量不同类型的完美统一的基础。不同测量方法是正确制定一定的规则和法规条款应加工程之前，立即开始同样的完成的工作和很多的完善及其变化的测量正确适用票据多量的相关准备。另一方面，在所有这些方法需要专家在该领域专家的意见和建议纠正措施的某些不足，再加上进一步的研究是矫正不同类型的缺陷需要时间的（戴维斯、尼古拉，和埃尔基jokiniemi 2008）。
测量方法的比较
在相关的开挖活动将完全视为包括切边、结疤、固结和不同类型的表面压实。此外，保持给定侧面的轮廓加上清理，以便立即根据需要和要求进一步施工。完全符合所有要求和要求，建议和限制有关的活动所执行的规定和规范，或所需的现场条款和条件。相关的处理、储存的任务，巩固和回填。其他的活动和任务是测试压实，保持整个地区没有水，工作空间，并支撑，去除，形成临时坡道改造工作，在合同文件中规定的其他工作。
定价的因素
不同类型的填充任务的价格将包括执行给定的层，保持最佳含水量水位、不同类型样品的规定，压实和样品测试，夯或滚动和边缘及表面处理层和填充包括压实和固结。开挖活动分为地面、地层和基底层。所述任务可能与电缆、管道和排水服务相关的工作相关，并将单独测量。另一方面，疏浚将完全衡量净通过体积。在情况下，如果需要特殊的土壤处理请求提供（Knecht，2011）。
澳洲工程学论文代写：建筑工程测量方法
The primary purpose of the Standard Method of Measurement of Building Works, the Concise Method of Measurement (CMM) and the Method of Measurement of Civil Engineering Works and Associated Building Works AS1182-1982 (Civil Method) is to largely provide a perfect uniform basis for the different types of measurement of building works under any situations and circumstances. The different kind of methods of measurement which are properly laid down with certain rules and regulations plus terms and conditions herein shall be rightly applicable to the quantities related preparation of bills much before the works are immediately commenced equally with the measurement of completed works and its variations with a lot of perfection. On the other hand, there are certain shortcomings in all these methods of measurements that need to be rectified with experts and specialists’ advice and suggestion in this particular field, plus further research studies is the need of the hour for correcting different types of defects (Davies, Nikolas, and Erkki Jokiniemi 2008).
Comparison of methods of measurements
In the activities related to excavation will be perfectly deemed to comprise of trimming, scabbing, consolidation and compaction of different types of surfaces. Moreover, keeping the given sides to profile plus cleaning out in order to receive immediate further construction as per the needs and requirements. With perfectly complying all needs and requirements, recommendations and restrictions concerning the said activities related carrying out as described by the regulations and specification or as needed by site terms and conditions. The tasks related to disposing, stockpiling, consolidation and backfilling. Other activities and tasks are testing of compaction, keeping the entire area free from water, working space, and shoring, removing, forming and reforming of temporary ramps, other work specified in the work contract documents.
Pricing factors
The prices of different types of filling tasks will include executing the given layer, maintaining water level with optimum moisture content, provision of different types of samples, testing of compaction and samples, tamping or rolling and edge plus surface treatment of beds and filling comprising compaction and consolidation. The excavation activities will be grouped as ground, formation and basement levels. The said tasks may be related to work associated with cables, pipes and drain services and it will be measured separately. On the other hand, dredging will be perfectly measured just net through volume. In case, if required special soil treatment is provided on request (Knecht, 2011).
